BYL-1500 Spiral Duct Making Machine

Products

News

Video

BYL-1500 Spiral Duct Making Machine

Byfo 1500 spiral duct machine is mainly used for building construction round pipe. It has the advantages of small air supply resistance, high strength and good sealing performance, fast processing and conversion of various diameters, high production efficiency, stable performance and wide length range.

Byfo 1500 spiral duct machine is mainly used for building construction round pipe. It has the advantages of small air supply resistance, high strength and good sealing performance, fast processing and conversion of various diameters, high production efficiency, stable performance and wide length range. Suitable for applications in filtration, ventilation, dust removal, environmental protection, construction and other industries. It is more affordable than the 1600 spiral duct machine and is one of the best options for customers to save costs and reduce expenses.

Introduction of Main Configuration   

–Composition

This equipment consists of three parts: decoiler, main machine and discharge table.

  • Decoiler

Byl-1500 Spiral Duct Making Machine

The decoiler is installed on the slide rail and is driven by a small motor at the tail to adjust the feeding angle. The size is ?  The weight is?

The diameter of the inner roll is 460-520mm, the maximum diameter of the outer roll is 1200mm, and the maximum load is 1100kg.

  • Main machine
  • Forming roller:There are 5 sets of rollers, the material is GCr15. roll the steel strip in multiple passes; the feed roller can be adjusted left and right to adjust the size of the left and right flanging of the steel strip.

Byl-1500 Spiral Duct Making Machine

  • Feeding roller: plays the role of feeding, there is an oil cylinder below to tighten the material belt, and the pressure is adjusted by an electric contact pressure gauge.

Byl-1500 Spiral Duct Making Machine

 

  • Coil part: forming head mold, closing wheel, etc. The closing wheel can be raised and lowered, and can also be fine-tuned left and right.

Byl-1500 Spiral Duct Making Machine

  • Cutting part: rolling shear or plasma synchronous tracking cutting, stepper motor drives ball screw drive, precise control.
  • Control part: electrical system, hydraulic system, pneumatic system.
  • PLC Console

Byl-1500 Spiral Duct Making MachineByl-1500 Spiral Duct Making Machine

  • Discharge table

Outlet rack: 2.1 x 1.0 x 1.0 m. The height of this air duct bracket is adjustable, and the pneumatic turning function is suitable for air ducts below 800mm. One bracket can accept pipes 2-4 meters long, and multiple brackets can be selected.

Byl-1500 Spiral Duct Making MachineByl-1500 Spiral Duct Making Machine

 

 

 

–Technical parameters

Diameter range 80-1500mm
Thickness range Galvanized sheet: 0.4-1.2mm, width 137mm
Stainless steel: 0.4-0.8mm, width 137mm
Decoiler inner coil diameter 460-520mm
outer coil maximum diameter 1200mm, maximum load 1100kg
Bite seam Outer bite

on the inside on request

Trip speed 1-38 m/min, adjustable
Cutting method Rolling shear cutting
Plasma cutting
Fixed length cutting Infrared sensor switch
Computer fixed length
Power system Pneumatic for shearing and turning
Hydraulic for feeding roller clamping
Forming head mold Steel
Compressed air power 0.5-0.7kmp
Electrical 380V/3PH/50HZ

(According to customer’s request)

Main Motor Power 5.5KW
The power of cutting motor 4KW
Total weight of equipment 2260kg
Overall dimensions of the equipment Main unit: 2.7*2*2.3m
Outlet rack:  m
Console Touchscreen/button

 

–Basic Accessories

  • Steel strip: The material of thesteel strip is A3 iron steel, We will provide 10 pcs steel strip molds, all sizes will follow your request, size range: 80-1500mm .

Byl-1500 Spiral Duct Making Machine

  • Optional accessories:

1、Fixed molds: The material of fixed mold is A3 iron steel, we can customize the fixed mold according to customer’s request. Size range: 80-1500mm

Byl-1500 Spiral Duct Making MachineByl-1500 Spiral Duct Making Machine

 

2、Stiffener. There are two styles of single wave and double wave, which can be installed on the mold. Generally, 250-1000 diameter pipes can be reinforced to increase the strength.

 

–Two cutting methods

The spiral duct machine adopts a power system combining pneumatic and hydraulic, which is controlled by PLC and is easy to operate. There are two cutting methods: roll shear cutting and plasma cutting.

 

 

Roll shear cutting                                  plasma cutting

 

 

The advantage of roll shear cutting is that the incision is smooth and the cutting is pollution-free. The disadvantage is that the cutting angle needs to be readjusted when changing the mold, and the blade gap is adjusted according to the thickness of the plate.

 

Another option: The advantage of plasma cutting is that it is suitable for any pipe diameter and thickness, but the disadvantage is that there is a lot of smoke and dust when cutting

Byl-1500 Spiral Duct Making MachineByl-1500 Spiral Duct Making Machine

 

–Spiral duct machine configuration list

Configuration 1 Configuration 2
Motor reducer Siemens – Germany
Air Cylinder SNS – CHINA
PLC Xinjie – CHINA Siemens
Electrical components Chint Schneider
Frequency Transformer Mitsubisi – JAPAN
Touch screen WeiKong Siemens
Hydraulic valve Ward
Pneumatic Components Made in China
Plasma Power Jasic

 

SKU 59a4b937c4b2 Keyword:

Related Products

Customer message