Hvac Auto Duct Making Machine 3

Introduction:

• Hvac duct line 3is one of the most efficient machines in HVAC industry, because it provides customers high production speed and affordable price.
• Hvac duct line 3 saves more time and labor cost than before.And also save the time to blanking, beading, notching, and shearing. It totally realize the working semi automatically.
• The hydraulic bending part can save more time and labor to make TDC or angle steel flange duct.
• Hvac duct line 3 adopts advanced technology, standard process, stable structure.
• Hvac duct line 3 can produce the duct in customers’factory and also our most customers take the hvac duct line 3 to their construction sites.
• Hvac duct line 3’s main spare parts are from import configuration. We have long cooperation suppliers, which promises the machines’quality and best sales service.

I: HVAC duct line 3 advantages:

• Import configuration: Mitsubishi systemwith double servo frequency conversion. It can ensure the accuracy. At the same time it realizes reliable synchronization and stable movement.
• Hvac duct line 3 is semi auto duct line. It greatly reducesthe labor cost of traditional manual operations and increase labor effective. Hvac duct line 3 with small space and lower production costs.
• HVAC duct line 3 can produce sheet smoothly, uniform in size and beautiful in appearance.
• Hvac duct line 3 with reasonable cost and convenient delivery.
• HVAC duct line 3 isa cost-effective equipment, it very suitable for the mixed production of TDF flange, Angle flange, and TDC flange.

II: HVAC duct line 3 main parts: 

One: One standard electric decoiler(two electric decoiler make the workers assemble the coils more easily）

• Onecoils max bearing 8 tons coils. One decoiler can max bearing 16ton coils.
• Decoiler(two coils)spreads diameter between 500mm and 600mm.
• One decoiler(two coils)with a 1.5kw motor.
• Hvac duct line 3 can alsocustomized decoiler with four coils. Four decoilers
• Four decoilermax bearing 32 ton coils. And Four decoiler with four 1.5kw motors, which differs from the standard 2 coils with one motor.

Two: One set of beading and leveling device

• One set of beading device with 2 beading rollers.
• One leveling devicewith 4 rollers
• Themain machine besides the beading device and leveling device, it also has the upper roller and coated with glue.
• Itensures that the feeding sheet does not slip in the middle and also the outer surface of the plate will not be damaged.
• All the roller shaft working surface is plated with hardchrome, which will not damage the outer surface of the sheet.
• After strict heat treatment and finishing, can fully ensure theshape requirements of the beading.
• If you want to make beads to strengthen the duct, you could adjust the bead roller by lifting the roller up or down toadjust the depth of beads.

Three: HVAC duct line 3 with four hydraulic angle steel notcher dies.

• 2 sets notchers for punching sharp mouth.
• 2 sets notchers for punching square mouth.
• 4 sets punching diesare composed of four sets of symmetrical dies on both sides, each die is driven by a cylinder with a diameter of 80mm and stroke of 65mm.
• Customers can adjustthe cutting angle and the cutting angle depth of different widths of plates by rotating the screw.

Four: Hydraulic plate shearing and bending device

• Shearing and bending device can shear and bend 1.2mm GI sheet
• the bending and shearing device controlled by the hydraulic cylinder and the material of bending and shearing device by 9Crsi.

Five: PLC control system

• Our PLC control system is Mitsubishi from Japan.
• Schneider PLC and driver is also optional.

III: HVAC duct line 3’s parameters

IV:  The working process of the HVAC duct line 3:

The working process:

Decoiler(bearing the coils)→ beading and leveling device(For beading and leveling the galvanized sheet)→hydraulic angle steel notching device (For notching “v” and “L” of the galvanized steel sheet)→hydraulic shear device (For shearing the sheet)→hydraulic folding machine(For bending the galvanized steel sheet)

V: Main configuration of HVAC duct line 3:

• PLC and Inverter：Mitsubishi from Japan
• Encoder: Omron from Japan
• Hydraulic system：Taiwan from China
• All the import configurations can ensure the accuracy and also realizes machines’reliable synchronization and stable movement.