Hvac Auto Duct Making Machine 3

Introduction:

Hvac duct line 3 saves more time and labor cost than before.And also save the time to blanking, beading, notching, and shearing. It totally realize the working semi automatically. The hydraulic bending part can save more time and labor to make TDC or angle steel flange duct.

• Hvac duct line 3is one of the most efficient machines in HVAC industry, because it provides customers high production speed and affordable price.
• Hvac duct line 3 saves more time and labor cost than before.And also save the time to blanking, beading, notching, and shearing. It totally realize the working semi automatically.
• The hydraulic bending part can save more time and labor to make TDC or angle steel flange duct.
• Hvac duct line 3 adopts advanced technology, standard process, stable structure.
• Hvac duct line 3 can produce the duct in customers’factory and also our most customers take the hvac duct line 3 to their construction sites.
• Hvac duct line 3’s main spare parts are from import configuration. We have long cooperation suppliers, which promises the machines’quality and best sales service.

I: HVAC duct line 3 advantages:

• Import configuration: Mitsubishi systemwith double servo frequency conversion. It can ensure the accuracy. At the same time it realizes reliable synchronization and stable movement.
• Hvac duct line 3 is semi auto duct line. It greatly reducesthe labor cost of traditional manual operations and increase labor effective. Hvac duct line 3 with small space and lower production costs.
• HVAC duct line 3 can produce sheet smoothly, uniform in size and beautiful in appearance.
• Hvac duct line 3 with reasonable cost and convenient delivery.
• HVAC duct line 3 isa cost-effective equipment, it very suitable for the mixed production of TDF flange, Angle flange, and TDC flange.

II: HVAC duct line 3 main parts: 

One: One standard electric decoiler(two electric decoiler make the workers assemble the coils more easily）

• Onecoils max bearing 8 tons coils. One decoiler can max bearing 16ton coils.
• Decoiler(two coils)spreads diameter between 500mm and 600mm.
• One decoiler(two coils)with a 1.5kw motor.
• Hvac duct line 3 can alsocustomized decoiler with four coils. Four decoilers
• Four decoilermax bearing 32 ton coils. And Four decoiler with four 1.5kw motors, which differs from the standard 2 coils with one motor.

Two: One set of beading and leveling device

• One set of beading device with 2 beading rollers.
• One leveling devicewith 4 rollers
• Themain machine besides the beading device and leveling device, it also has the upper roller and coated with glue.
• Itensures that the feeding sheet does not slip in the middle and also the outer surface of the plate will not be damaged.
• All the roller shaft working surface is plated with hardchrome, which will not damage the outer surface of the sheet.
• After strict heat treatment and finishing, can fully ensure theshape requirements of the beading.
• If you want to make beads to strengthen the duct, you could adjust the bead roller by lifting the roller up or down toadjust the depth of beads.

Three: HVAC duct line 3 with four hydraulic angle steel notcher dies.

• 2 sets notchers for punching sharp mouth.
• 2 sets notchers for punching square mouth.
• 4 sets punching diesare composed of four sets of symmetrical dies on both sides, each die is driven by a cylinder with a diameter of 80mm and stroke of 65mm.
• Customers can adjustthe cutting angle and the cutting angle depth of different widths of plates by rotating the screw.

Four: Hydraulic plate shearing and bending device

• Shearing and bending device can shear and bend 1.2mm GI sheet
• the bending and shearing device controlled by the hydraulic cylinder and the material of bending and shearing device by 9Crsi.

Five: PLC control system

• Our PLC control system is Mitsubishi from Japan.
• Schneider PLC and driver is also optional.

III: HVAC duct line 3’s parameters

IV:  The working process of the HVAC duct line 3:

The working process:

Decoiler(bearing the coils)→ beading and leveling device(For beading and leveling the galvanized sheet)→hydraulic angle steel notching device (For notching “v” and “L” of the galvanized steel sheet)→hydraulic shear device (For shearing the sheet)→hydraulic folding machine(For bending the galvanized steel sheet)

V: Main configuration of HVAC duct line 3:

• PLC and Inverter：Mitsubishi from Japan
• Encoder: Omron from Japan
• Hydraulic system：Taiwan from China
• All the import configurations can ensure the accuracy and also realizes machines’reliable synchronization and stable movement.